Gioia Cristalliera
Estimated Delivery time of 30-35 days from order confirmation
Choose the option that better suits you! On mobile double click on the option. Price add on calculated at check out
GIOIA cristalliera 4 doors 2 drawers
Measurements L.124 D.52 H.223 cm
Gioia is a glass cabinet made up of a sideboard and a display case. The riser consists of two lockable glass doors and two internal glass shelves. The base has two doors with rebate closure, a solid wood frame with 45-degree interlocking, an internal ashlar panel and a lock. The internal compartment is large and capacious and equipped with a shelf. The two drawers have a rebate closure, a framed front with frames and are embellished with solid wood sides with dovetail joints. To complete the elegant and refined plinth on the ground. A piece of furniture defined by classic materials and shapes, it is contaminated by the evolution of new colors. Inspired by the past but revisited in a modern key, it becomes a piece of furniture with a contemporary style and timeless charm.
Technical sheet: frames, doors, drawers in solid wood Veneered top and sides Backrest in plywood
LACQUERING Lacquering is a type of finish that has lacquer as its basic element, i.e. a coloured opaque varnish (polyester or polyurethane). The artifact is previously checked, sanded to eliminate any imperfections of the wood and then a layer of lacquer is applied by hand using special airbrushes. The process then ends with finishing and drying in the pressurized cabin. The effect of the lacquer is usually opaque but by using particularly porous essences such as ash or oak we can also obtain an open-pore lacquer. The colors we have available for our furniture are infinite and include all color scales (Ral, Ncs, Pantone..). With the lacquered finish you can dress your furniture in the color you prefer or better matches your environment.
DOVETAIL JOINTThe dovetail joint is a very resistant type of joint that allows two wooden planks to be joined at right angles. Thanks to the use of special milling machines, the edge of both axes is engraved, forming a trapezoidal-shaped joint similar to the tail of a swallow. The resulting joint has a very elegant appearance and is intended to withstand continuous and consistent stress.